Plasma cutter Solaris AirCut PC-400 (220 V; 15-40 A; High-voltage ignition; built-in compressor; thermal protection; soft start) Отзыв

Advantages: - IGBT inverter technology - High voltage contact ignition - Plasma cutter with ergonomic handle included - Soft start function - Overheating protection Has a built-in air compressor, so it does not require connection to an external compressor. Attention! The device is supplied without a plug. The device must be equipped with a single-phase power plug 32 A 230 V (not included).---Technical characteristics: Supply voltage: ~ 230 V + 15% Supply frequency: 50/60 Hz Type of network: 1 phase No-load voltage: 270 V Rated output: 40 A / 96 V Duty cycle (duty cycle) at max. current: at 40°C: 35% (EN 60974-1) at 20°C: 60% Rated input current: 14.9 AMaximum admissible input current: 25.2 A Rated power consumption at max. current: 5.8 kWMaximum cutting thickness: 15 mmCutting thickness of non-ferrous metals: 9 mmPerformance of the connected compressor: not requiredNominal operating pressure of the compressor: 0.4 - 0.5 MPa (4-5 bar) Warranty period: 12 months---Complete set:Plasma cutter 3mA PlasmaCutter Accessory2M Ground Terminal ---Compatible Products:WGC-3130 3m Plasma CutterWGC-3150 5m Plasma CutterWA-3940 Ceramic Cap WA-3941 Diffuser WA-3942 Nozzle (Standard)**WA-3943 Nozzle (Extended)* *WA-3944 Electrode (Standard)**WA-3945 Electrode (Extended)**** Note: The nozzle must match the electrode being used. Do not use a standard nozzle with an extended electrode and vice versa