Sealant butyl rubber tape 10mm. Length 20 meters (black) Отзыв

Self-adhesive sealing butyl rubber tape with a double-sided working surface. It is used for sealing, hydro-, sound insulation of joints of culverts, tunnel finishes, tin and slate roofs, sealing translucent structures, double-glazed windows, for sealing joints in prefabricated housing construction, when assembling sandwich panels, in mechanical engineering, in greenhouses. The material does not absorb moisture and does not decompose, it is a non-curing sealant. Due to the fact that both surfaces are working on it, the tape can be used without difficulty even on difficult surfaces and materials. It should be noted that the tape retains its properties over a very wide temperature range. Application: Before applying the sealant, the working surface of the joint must be cleaned of dust and dirt, dried from moisture, and in winter from ice, snow, frost. When working, it is necessary to remove the anti-adhesion coating and apply the tape to the work surface and attach to another surface. If the material is stored at negative, then before use it must be kept in a warm (+20 ° C) room for a day. Main properties: •heat and noise insulation •sound absorption up to 70% (depending on thickness) •good waterproofing •microbiological and chemical resistance •material does not rot, mold, oil and petrol resistant •elastic •hygienic and environmental safety •environmentally friendly . • durability (80 - 90 years of operation without loss of properties) • wide temperature range (from -60 to +95 C) • fire safety • does not contain acid and alkaline additives