Sealant for car repair Done Deal DD6789 Отзыв

Bandage for muffler repair Done Deal 1 pc, Description High temperature bandage for muffler repair (101 x 5cm) Done Deal DD6789. High-temperature ceramic tape for quick and high-quality repair of pipes made of any material, operating at temperatures up to +650 °C and pressure of 20 atm (including water pipes). High temperature ceramic tape for repairing mufflers and pipes of any material. Characteristics Composition - fiberglass, sodium silicate, additives. White color. Thermal stability - up to +650 °C. Hardening time - 30-40 minutes at a temperature of +25 °C. Time of full polymerization - does not exceed 24 hours. Application area Repairs with high strength (even under water) pipes made of: steel, non-ferrous alloys, aluminium, plastic, fiberglass, PVC, hard rubber. Allows you to quickly and efficiently repair: pipes of the exhaust system, burnt-out mufflers, any pipes operating at temperatures up to +650 ° C and pressures up to 20 atm (including water pipes). Features and Benefits DD6789 repairs with high durability even underwater; withstands temperatures up to +650 °C; withstands pressure up to 20 atm; maximum operating temperature +1400 °С. Application Make sure there is no pressure in the system being repaired. Clean the repaired surface from dirt, grease, loose rust, peeling paint, sand and degrease. Wear the supplied rubber gloves. Open the tape bag and pour water into it, let the tape get wet for 1 minute. Squeeze the bag several times to better soak the tape with water. Remove the tape from the bag and wrap it around the repaired section of the pipe or muffler, starting 5 cm from the edge of the repaired area. Wind 8-10 layers of tape. Use the entire tape as it cannot be stored after the package has been opened. Flatten the wound tape, while it should stretch as much as possible and press against the repaired surface. When the tape begins to foam and bubble, continue to flatten the tape by pressing it down in a circular motion. The final stage in the formation of the ceramic jacket occurs when the tape becomes tacky. At a temperature of +25 °C curing occurs in 30-40 minutes. At low temperatures, curing slows down, but does not exceed 24 hours. After curing, the repaired area can be sanded and painted with heat-resistant paints. Warning. DD6789 - Carry out repairs with rubber gloves. If swallowed, drink water or milk, induce vomiting and seek medical advice. In case of contact with skin, wash with soap and water. In case of contact with eyes: rinse with water for 15 minutes. Keep out of the reach of children!