Отзыв о 6-дюймовая насадка для душа из полированного никеля с 6 режимами распыления, высоким давлением, латунным шарнирным креплением и удлиненным гибким шлангом из нержавеющей стали от Couradric. от Andres Black

I was looking for a shower head that had more jets of water versus a cheap one that I bought that only had two holes along the outer of the head resulting in basically no water in the middle if using the "rain shower" setting. This shower head has 3 jets of water all over the circumference, and with the shower head itself being much larger than a typical one, the rain shower feeling is just wonderful! Also, the hose is a strong metal one that bends easily, and is much longer than the cheap plastic ones that don't bend. One thing I did do was take the pressure reducer out because I do like to have more pressure during a shower. This was quite tricky - but here's how I did it - use open end of paper clip to pry out the washer, then use a set of tiny eyebrow tweezers with the pointy end (not open, but closed) (or a small screwdriver or anything that is tiny and strong would work too) then push into one of the holes of the pressure reducer and turn in a circle until it loosens, then keep turning until it comes out. I tried using plyers, screws, hex wrench, etc, and nothing worked except for the tweezer turn method. Hope this helps!