Glue epoxy Kafuter AB, 70 g Отзыв

Two-component adhesive with high adhesive strength Kafuter AB. Suitable for bonding oily surfaces. The adhesive seam after hardening is strong and elastic, ideal for repairing laptop case parts, gluing plastic, glass, stone, metal, ceramics and other materials. It consists of two tubes of glue A and B, when combined (mixed in a 1:1 ratio), a binary mixture is formed with special characteristics (a small plastic spatula is included). Characteristics: -Viscosity, cps: 4000±500 - Setting time, 25°C: 5 minutes - Seam tensile strength, mpa: ≥ 18 - Seam strength to impact, kJ/m3: ≥ 10 -Color of tube A: green - Tube Color B: Pale Orange -Color after curing: white Features of two-component adhesive: -Two-component adhesive - universal. It is equally good for metal, plastic, wood, cement, porcelain, glass. It is applied practically at any repair work. -Glue has excellent adhesion to any surface, including oil. Even PTFE can do it. It can be used as a two-component stone adhesive. - The composition has a high resistance to aggressive environments (acid, alkali), resistant to aging. -After hardening, the adhesive retains plasticity, does not crack under load. - Can be used for "urgent" repairs, as the composition begins to harden within 5-10 minutes, it takes no more than 30 minutes to completely harden. Application: -Before use, clean surfaces from contamination. -Squeeze an equal amount of glue (1:1) from the tubes and mix thoroughly. Apply the resulting substance to the parts to be glued. - Hardening occurs within 5-10 minutes at room temperature. Complete drying occurs after 30 minutes. -Glue withstands temperatures from -60°C to 200°C