Autoscanner ELM327 OBD-II Bluetooth Отзыв

ELM327 OBD 2 Car Diagnostic Scanner Version 1.5 Bluetooth. Communication with the device only via Bluetooth, works ANDROID, IOS, Windows. The connection is configured from an application, for example, CAR SCANNER, Torque, etc. If the scanner does not read errors, try downloading another application or check the connection settings. The connection goes like this: - In the Car Scanner app, go to Settings - Connection - select the connection (for Android - Bluetooth, for IOS - Bluetooth 5.0!) - in the list of devices find OBD2. Wait for the connection for 2-5 seconds via Bluetooth and enter the PIN code: 1234. It is important that at the time of connection the device does not pair via Bluetooth with other devices, for example, with the Bluetooth system of the car itself. - Now return to the main page of the application and click connect, if everything worked out, then 2 or 3 diodes will light up on the scanner. The scanner supports all common protocols and is able to understand over 3000 codes and errors. You can find more detailed instructions by clicking on the KuAr code in the photo section. Examples of diagnostic applications: CarScanner, Torque, OBD Car Doctor, Dash Command, OBD Fusion and others. Instructions Connection on IOS 1. Connect the adapter to the on-board computer connector. 2. Turn on Bluetooth on your iPhone/iPad. 3. Install diagnostic app - ELM327 Bluetooth app for iPhone from Apple Store, such as "Car Scanner". 4. Open the application on the iPhone and go to the settings. 5. In the "Connection" section, select its type: "Bluetooth 5.0", and then - Select device". 6. The device will search for the adapter. This usually takes up to 10 seconds. If necessary, click the Update button. The adapter has a name consisting of a set of letters and numbers or an inscription (OBDII). When necessary an inscription will appear on the screen, click on it. The software will check the device for compatibility. 7. Now on the main screen of the program, you must click "Connect". The connection is established and the program can be used. - Possible mistakes If the iPhone does not see the ELM327 Bluetooth or some other difficulty occurs, then one of the following problems is possible: the ignition is off; poor contact between the adapter and the connector: insert the device more tightly. Connection on Android 1. Install the diagnostic application on your smartphone (indicate examples of applications with icons, something like this + add the Car Scanner application icon. 2. Connect the scanner adapter to the on-board computer connector. 3. Start the engine. 4. Connect the autoscanner to your smartphone via Bluetooth (password 1234 or 0000). 5. Launch the application and start diagnostics.