Bicycle lamp Fenix ​​BC25R, 1 x 18650, diode Cree XP-G3 NW, 106 meters, power 600 lumens (Set) Отзыв

The Fenix ​​BC25R bicycle headlight is equipped with all the features to provide its owner with quality light on the road and make cycling more convenient and safe. It is suitable for installation on bicycles of any model, as it is equipped with a universal mount with additional pads of different thicknesses. One of the main elements of the Fenix ​​BC25R is the Cree XP-G3 LED, which provides it with a brightness of 600 lumens. It gives off a neutral shade of white light, similar to natural sunlight. This bicycle headlight model supports 5 modes of operation. Four of them are designed for normal lighting in constant mode with different brightness. The fifth mode is useful to give signals on the road, and will also be useful during rain or fog, when overall visibility is reduced. Some other characteristics of the bicycle headlight will also depend on the selected brightness. The BC25R bicycle headlight control system is made very simple. It consists of just one button, which the engineers placed on the top side of the case. This button allows you to turn the bike light on and off, select any of the 5 modes of operation, and also activate the indicator. Four small indicator lights are located next to the button itself and are clearly visible when turned on. For 3 seconds, they show how much the battery is charged. If all 4 lights turn on, the charge level is 85% -100%. If 3 lights turn on, the charge level is 50% -85%. If 2 lights turn on, the charge level is between 25% -50%. If only 1 light turns on, the charge level does not exceed 25% and it''s time to charge the bike headlight. The Fenix ​​BC25R is powered by its own built-in battery. To charge it, you need to connect the flashlight via the included USB cable to a power bank or other compatible device. With a capacity of 2600 mAh, it will take 2.5 hours to fully charge it. During this period, the bicycle headlight can operate in the lowest brightness mode, but then it will take longer to charge. To extend the life of the bicycle headlight, manufacturers have tried to provide it with all the most necessary protection mechanisms. So, it will not overheat, because when the temperature of the diode rises above the permissible norm, the flashlight will automatically reduce the brightness so that the optical unit can cool down. The bicycle headlight is also well protected from getting wet due to the insulation of all joints of the body. Fenix ​​BC25R can even work in the rain, and if necessary, it can be washed in water. The level of waterproofing of this model complies with the IP-66 standard. By the way, the case is made of plastic, it will provide protection against impacts and other mechanical damage. Fenix ​​BC25R is very easy to install on the handlebars of a bicycle. The bicycle headlight kit includes a universal mount suitable for handlebars of various diameters. After installing it, the bike headlight itself is fixed in the mount in just a couple of seconds. In the same way, it can be easily removed if it is necessary.